mediaincludednews

Worx WX711 Information the information about Worx WX711: Introduction The Worx WX711 is a 750-watt angle grinder that is perfect for a variety of DIY and professional applications. It has a powerful motor that can handle even the most demanding tasks, and it comes with a variety of features that make it easy to use and safe to operate.

DeWalt DC618KA Information The DeWalt DC618KA is a 18V cordless finish nailer that features a 20-degree angled magazine and a sequential operating mode for precision placement. It has a 6-position depth dial that allows users to move between applications without resetting depth, and an easy jam removal system for quick troubleshooting. The tool is powered by an 18V XRP lithium-ion battery and delivers up to 3,000 nails per charge. It is also compatible with Paslode 20-degree nails. Here is an overview of the DeWalt DC618KA: 18V XRP lithium-ion battery Sequential operating mode 20-degree angled magazine 6-position depth dial Easy jam removal system Compatible with Paslode 20-degree nails Specifications

Fluke 323 Information The Fluke 323 is a true-RMS clamp meter that is ideal for commercial and residential electricians. It features a slim, ergonomic design for measuring in tight cable compartments. It also has a large, easy-to-read display, a hold function to capture a reading on the display, and a CAT III 600 V, CAT IV 300 V safety rating. Introduction The Fluke 323 is a basic troubleshooting tool that can be used to measure AC and DC voltage, AC current, resistance, and continuity. It also has a capacitance measurement function, but this is only available on the Fluke 324 and 325 models. The Fluke 323 is not able to measure DC current or frequency.

Stiga SMT 100 AE Information The Stiga SMT 100 AE is a cordless multi-tool that allows you to easily trim and prune high bushes and trees without having to climb a ladder. It is powered by a 20V 4Ah E-Power battery that provides up to 70 minutes of cutting time and 20 minutes of pruning time on a single charge. The SMT 100 AE comes with a hedge trimmer and pruner saw attachment, as well as a 55cm telescopic extension that allows you to reach up to 2.75m (hedge trimmer) and 2.55m (pruner saw). Image of Stiga SMT 100 AE Here are the full specifications of the Stiga SMT 100 AE:

Bosch BP350 Information the information about the Bosch BP350: Introduction The Bosch BP350 is a telescoping pole system that allows you to use your laser tools at any height. It has a quick-set clamp that makes it easy to attach to virtually any surface, and its microfine height adjustment system lets you get the perfect placement every time. The BP350 is also compatible with the optional Bosch WM1 Universal Mount, so you can use it with a wider range of laser tools.

Einhell TC-MS 2513 L Information The Einhell TC-MS 2513 L is a miter saw that is designed for crosscuts and miter cuts in workpieces made of wood, laminated panels, and plastics. It features a mains-powered laser for precise guidance while cutting, workpiece supports on both sides for long workpieces, and a high-grade carbide-tipped precision saw blade for perfect cuts. Image: Full specifications:

RYOBI Max Power RY36CSX35A Information The Ryobi Max Power RY36CSX35A is a powerful and versatile cordless chainsaw that is perfect for a variety of tasks, from cutting firewood to trimming trees. It features a brushless motor that delivers up to 1,600 cuts per charge, and a 35 cm (14") bar and chain that can handle even the toughest jobs. The chainsaw is also lightweight and easy to use, making it a great choice for homeowners and professionals alike. Image: Specifications:

AEG BEWS 18-125X Information Introduction The AEG BEWS 18-125X is an 18V cordless angle grinder that is perfect for a variety of applications, including cutting, grinding, and polishing. It is powered by a brushless motor that delivers up to 9000 RPM, and it features a beznarzędziowe mounting system for quick and easy disc changes. The BEWS 18-125X also has an anti-vibration system that helps to reduce user fatigue, and it comes with a number of safety features, including a thermal overload protection and a kickback protection. Image

Einhell TE-CC 2025 UF/S Information Introduction The Einhell TE-CC 2025 UF/S is a table saw that is designed for precision cuts. It is equipped with a carbide-coated precision saw blade, a flat aluminum table, and a format slide. The saw blade is adjustable in height and angle, and the table can be extended to the back and right side. The TE-CC 2025 UF/S also comes with a push stick, a parallel stop, a cross stop, and a transparent saw blade guard with chip extractor connection. Image

Bosch HDS181-01 Information The Bosch HDS181-01 is a 18V cordless hammer drill/driver that is part of the Bosch Compact Tough series. It is designed for a variety of drilling applications in materials from concrete to wood to metal. The HDS181-01 has a 7-1/2 inch head length, which is the smallest in its class, yet it still delivers top performance with strong power. Image: Specifications:

DeWalt DC728 Information The DeWalt DC728 is a 14.4-volt cordless drill that was first released in 2005. It is a powerful and versatile tool that can be used for a variety of tasks, including drilling holes, driving screws, and loosening and tightening nuts and bolts. The DC728 features a 2-speed transmission with a maximum speed of 1400 RPM, a keyless chuck, and a belt hook. It is powered by two Ni-Cad batteries, which can be charged in about 1 hour. Image of DeWalt DC728 cordless drill Specifications

Uni-T UT207 Information The Uni-T UT207 is a professional-grade digital clamp meter that is designed for a variety of electrical measurements. It features a true RMS measurement, auto-ranging, and a wide range of functions, making it a versatile tool for electricians, engineers, and other professionals. Introduction The UT207 is a 1000A AC/DC clamp meter that can measure a wide range of electrical values, including:

Einhell TC-JS 80/1 Information Intro The Einhell TC-JS 80/1 is a powerful and versatile jigsaw that is perfect for a variety of cutting tasks. It features a 550-watt motor that provides plenty of power for cutting through wood, plastic, and even metal. The four-stage pendulum action allows you to make precise and fast cuts, while the softgrip handles provide a comfortable grip. The saw also features a pivoting baseplate that allows you to make bevel cuts up to 45 degrees. A dust extraction port keeps your work area clean, and the tool-less blade change makes it easy to switch between different blades. Image

Dremel 2222 Information The Dremel 2222 is a tool holder designed to enhance the DIY experience and maneuverability of your Dremel rotary tool with flexible shaft (225). It allows you to hang your multi-tool and flexible shaft, keeping the shaft in a natural position and reducing weight, creating a lighter feel for increased control and comfort. The tool holder also has a telescopic adjustment up to 107cm, so you can have the perfect working height for your flexible shaft. The base of the tool holder has storage space for your accessories, for more convenience and efficiency while you work. Image of Dremel 2222 tool holder Specifications

Bosch ART 23 Accutrim Information The Bosch ART 23 Accutrim is a lightweight and powerful cordless grass trimmer that is ideal for trimming around lawns, borders, and other hard-to-reach areas. It is powered by an 18V Bosch Power for All battery, which provides up to 800 meters of trimming on a single charge. The trimmer features a 90-degree rotating cutter head for effortless trimming and edging, as well as an aerodynamic cutting technology that allows for an accurate cut while saving energy. Specifications

Dolmar 166 Information The Dolmar 166 is a powerful and versatile chainsaw that is well-suited for a variety of tasks, from felling trees to limbing to bucking. It is powered by a 118cc, 2-stroke engine that delivers 3.1 horsepower, and it features a 1.2-liter fuel tank that provides long runtimes. The saw has a 21-inch Oregon bar and chain, and it comes with a variety of features that make it easy to use and maintain, including an automatic chain oiler, a large front handle, and a rear hand guard. Image of Dolmar 166 chainsaw Specifications

Skil 6390 Information the information about the Skil 6390: Intro The Skil 6390 is a cordless oscillating multi-tool that is designed for a variety of tasks, including cutting, sanding, scraping, and grout removal. It is powered by a 20V MAX lithium-ion battery and has a variable speed control that allows you to adjust the speed to the task at hand. The Skil 6390 also has a tool-free blade change system that makes it easy to swap out blades.

Bosch GTS1031 Information Introduction The Bosch GTS1031 is a 10-inch portable jobsite table saw that is designed for ultimate portability and durability. It features a powerful 15-amp motor that delivers smooth, effortless cuts, and a unique all-steel base that is both lightweight and tough. The GTS1031 also comes equipped with a number of features that make it a safe and easy-to-use saw, including a Bosch Smart Guard System modular blade guard and a SquareLock™ rip fence. Image

DeWalt DW411 Information The DeWalt DW411 is a 1/4-sheet palm sander that is designed for precision sanding in small and awkward areas. It features a 2.3 amp motor that delivers 14,000 OPM, and a separate counterweight that reduces vibration for a more comfortable grip. The sander also has a dust sealed switch and bearings for a long life. Image of DeWalt DW411 palm sander Specifications

Bosch GSB 18 VE-2-LI Information the information about the Bosch GSB 18 VE-2-LI: Introduction The Bosch GSB 18 VE-2-LI is a cordless drill that is perfect for a variety of tasks. It is powerful and versatile, making it a great choice for both professional and DIY users. The drill is powered by two 18V batteries, and it has a maximum torque of 135 Nm. It can be used for drilling in wood, metal, and masonry, and it can also be used for driving screws. The drill is lightweight and easy to use, and it comes with a variety of accessories.

Worx WG323 Information The Worx WG323 is a 20V cordless pole saw that is designed for trimming and cutting branches up to 10 inches in diameter. It features a 10-inch Oregon bar and chain, an auto-tensioning system, and a telescoping pole that extends from 6 to 10 feet. The saw is powered by a 20V Power Share battery, which is also compatible with other Worx tools. Image of Worx WG323 cordless pole saw Specifications

Maktec MT652 Information The Maktec MT652 is a 230-watt, 6.5mm corded drill that is perfect for a variety of DIY and home improvement projects. It has a variable speed trigger that allows you to control the speed of the drill, making it ideal for both delicate tasks like drilling pilot holes and more demanding tasks like driving screws. The MT652 also has a two-speed gear mechanism that provides more power for drilling through tough materials. Specifications

Meec Tools 005-203 Information the Meec Tools 005-203 information: Intro The Meec Tools 005-203 is a 12-in-1 multi-tool that is perfect for a variety of tasks around the home and workshop. It features a steel construction and a durable plastic handle, making it a reliable and long-lasting tool. The Meec Tools 005-203 also comes with a 12-piece accessory kit, including a saw blade, a file, a screwdriver, and a wrench.

Einhell RT-CS 165 Information The Einhell RT-CS 165 is a powerful and versatile hand-held circular saw that is perfect for a variety of woodworking tasks. It is powered by a 1200-watt motor that delivers up to 5200 rotations per minute, making it capable of cutting through even the toughest materials. The saw features a 165mm blade that can be adjusted to a variety of angles, making it ideal for both straight and curved cuts. It also comes with a number of safety features, including a kickback brake and a dust extraction port. Introduction The Einhell RT-CS 165 is a great choice for anyone who needs a powerful and versatile circular saw for woodworking projects. It is easy to use and has a number of safety features that make it a safe saw to operate.

Makita DUB184 Information The Makita DUB184 is a 18V LXT BL Brushless Cordless Variable Speed Blower. It is a powerful and versatile tool that can be used for a variety of tasks, such as clearing leaves, debris, and dust. The DUB184 features a brushless motor that delivers up to 52.1 m/s and 13.0 m³/min of air volume, making it one of the most powerful cordless blowers on the market. It also features a variable speed trigger that allows you to adjust the airflow to suit your needs. Image of Makita DUB184 Cordless Blower Specifications

Bosch GBH 2-18 RE Information The Bosch GBH 2-18 RE is a compact and powerful cordless rotary hammer that is ideal for a variety of DIY and professional applications. It features a powerful 550-watt motor that delivers up to 3960 impacts per minute, making it capable of drilling through concrete, brick, and masonry. The GBH 2-18 RE also has a reversing function for driving and removing screws, as well as a built-in LED work light for illuminating dark work areas. Image of Bosch GBH 2-18 RE Specifications

Metabo G 400 Information The Metabo G 400 is a powerful and versatile die grinder that is ideal for a variety of applications. It features a robust and wear-resistant motor that delivers up to 380 watts of power, making it capable of handling even the most demanding tasks. The long grinding spindle is ideal for working on hard-to-reach places, and the removable protective rubber cap provides added safety. The slim design of the G 400 makes it easy to maneuver, and the comfortable grip provides a secure hold. Here is a table of the full specifications of the Metabo G 400: Feature Specification Power 380 watts No-load speed 25,000 RPM Weighted speed 11,700 RPM Collet size 6 mm Weight 1.5 kg Cable length 2.55 m Here are some of the features of the Metabo G 400:

Voltcraft VC175 Information the information you requested about the Voltcraft VC175 multimeter: Introduction The Voltcraft VC175 is a digital multimeter that is designed for a wide range of electrical measurements. It has a CAT III 600 V rating, making it safe to use for professional electrical work. The VC175 features a 4000 count display, automatic range selection, and a variety of measurement functions, including AC/DC voltage, current, resistance, capacitance, frequency, and duty cycle. It also has a built-in LED flashlight and a backlit display for easy viewing in low-light conditions.